Victor Retrofit
Service kit to update conventional Tehdasvalo Victor luminaires to LED
Victor housings are made to last for decades in demanding conditions. That’s why their life can usually be extended with LED kit without a worry.
Benefits:
- easy and cost-effective update to LED
- Saves energy up to 50% compared to discharge lamps
- Lower environmental impact by extending the life cycle of resistant Victor housings
- no need to change cabling / installation
- instant ignition with LED, also after mains failure
- long-lived and carefree lighting with less maintenance
VICTOR RETROFIT KIT INCLUDES:
- LIGHT MODULE = LED modules and lenses ready fastened to heat sink + ready wiring
- DRIVER MODULE = LED driver and terminal block ready fastened to mounting plate + ready wiring
- INSTALLATION ACCESSORIES = screws and washers, new type & service labels
Attention! Spare cover to be ordered separately if necessary. See 'options' below for available luminaire covers.
TECHNICAL DATA:
| Light source: |
2x 32W 5390lm 168lm/W @700mA (70W) 4x 22,5W 3990lm 179lm/W @500mA (96W) 4x 32W 5390lm 168lm/W @700mA (140W) |
| Light output: | 10100—20200lm |
| Color temperature: | 4000K |
| CRI: | >70 (other upon request) |
| MacAdam: | ≤ 4 SCDM |
| Voltage: | 230V AC |
| Electrical class: | I |
| Connection: |
5-pole terminal block with screw connection, suitable for –0– and plug connection |
| Lifetime: | L90B10 >100.000h |
| Ta: | -40°C … +35..45°C (max ta varies between types, see the product codes below) |
| Installation: | Suitable only to Tehdasvalo Victor luminaires. Installation may only be done by a professional electrician. |
| Warranty: | 5 years |
Versions and product codes
| Code | Total power | Net flux* |
Ta max | Suitable to luminaire** |
| M70 O 28 VD | 70 W | 10100 lm | 45°C | 010 S 00 / 010 S 01 / 010 S 02 |
| M95 O 28 VD | 96 W | 15000 lm | 40°C | 015 S 02 |
| M130 O 28 VD | 140 W | 20200 lm | 35°C | 025 S 05 / 025 S 06 |
*Note! Flux does not take into account the effect of the luminaire cover. Consider the following loss of flux depending on luminaire type: 10% acryl and glass covers, 20% PC-covers.
**Also suitable to conventional Victor ”rapid” versions with halogen/LED back up lamp,
Options
Existing, good-conditioned covers work with LED as well. If replacement is necessary, covers will be replaced with new LED-covers — to be ordered separately according to following product codes.
| Code | Specification | Suitable to luminaire |
| 875 0 28 D0 | Cover LED 750M low, crepe glass | 010 S 00 / 010 S 01 / 010 S 02 / 015 S 02 |
| 875 0 28 D0 PM | Cover LED 750M low, PMMA (acryl) | 010 S 00 / 010 S 01 / 010 S 02 / 015 S 02 |
| 810 0 28 D0 | Cover LED 1000M low, crepe glass | 025 S 05 / 025 S 06 |
| 810 0 28 D0 PMMA | Cover LED 1000M low, PMMA (acryl) | 025 S 05 / 025 S 06 |
Max quantity / circuit breaker
|
|
MAX. QUANTITY / MCB |
|||
|
Type |
B10A |
B16A |
C10A |
C16A |
|
M70 O 28 VD |
7 |
12 |
11 |
19 |
|
M95 O 28 VD |
7 |
11 |
11 |
17 |
|
M130 O 28 VD |
5 |
8 |
8 |
12 |
