FASTLED 3
LED 200W 26550lm / 340W 46850lm
BODY: Made of die-cast aluminium painted with polyester powders, standard colour dark grey.
SCREEN: Tempered flat glass, thickness 4mm.
GASKETS: Made in silicone.
SUPPLY UNIT: Electrical components mounted inside the body, in the specific compartment.
Life expectancy of the ballasts at Tc 100.000h for dimmable solution.
Supply voltage 220÷240V 50-60Hz.
Insulation class II, class I available on request.
CONNECTION: M20 IP68 suitable brass cable gland for 9÷11 mm cable. Plug-in power supply terminal block rapid 1.0÷2.5 mmq.
OVERVOLTAGE PROTECTION: Standard fitting are equipped with TMOV which guarantees a resistance to overvoltages in different ways up to 10kV and in common mode up to 6kV. For class I, available on request with SPD with increased immunity grade (10kV / 10kA).
FIXING: Bracket with goniometer for tilt adjustment with 5° steps.
LED MODULES: LED modules consisting of 48 or 100 LED chip of last generation. Multi-die technology that guarantees a very hight flow and an excellent
efficiency 170lm/W @ 640mA 25°C. Expected life of the led 80.000h L80B10 (TM-21 Projection). Secondary optic in stabilized PMMA. Multi-layer lighting concept in witch each optic illuminates the entire street so as to guarentee uniformity parameters even if some LEDs are failed. Available different photometric curves to optimize the performances in various areas.
Versions and product codes
|
Initial code |
Specification |
Power |
Lm out | Insulation class |
Weight |
|
004904844_ |
FASTLED 3 PR E 48LED 200 4K |
200 W | 26550 lm | I | 13 |
| 0049010044_ | FASTLED 3 PR E 100LED 400 4K |
340 W |
46850 lm |
I |
15 |
Choose the last number according to preferred optics:
| Last number of the code |
Optics |
| 0 | 120° |
| 1 | 90° |
| 3 | S1 |
| 4 | S4 |
| 5 | AS3 |
| 6 | AS |
| 7 | 23° |
| 8 | 35° |
| 9 | 60° |
| A | AS60° |
Downloads:
FASTLED 3 PR (datasheet, pdf)
